How to Connect a 3-Axis Robot to the Injection Molding Machine?
- Aug 02, 2019
- Hits: 129
After the 3-axis robot is installed on injection molding machine, then we need to connect the 3-axis robot with the injection machine: 1. Connect the wires: Turn off the power of injection machine....
How to Install a 3-Axis Robot on Injection Molding Machine?
- Aug 02, 2019
- Hits: 19
1. Check if the injection machine is functioning normal: open mold, close mold, thimble out, safety door and so on. 2. (If the injection machine fixed platen already have holes, this step can be ignored)...
Problems and Solutions While Using 3-Axis Robots
- Aug 02, 2019
- Hits: 12
The alarm warns no matter if the 3-axis robots successfully sucked the product or not, what's the reasons and solutions? Reason 1: Somewhere is leak air, the negative pressure is not set correctly....
RUNMA Expands High Speed Take Out Robots
- Aug 02, 2019
- Hits: 8
RUNMA automation have extended the range of high speed take out robots primarily used in the packaging industry. The high speed robots will run at high speed on injection molding machines from 80...
Plastic Robotic Arms
- Aug 02, 2019
- Hits: 5
As injection molding machine technology and the rapid development of science and technology, the plastic molding factory automation demand is higher and higher, so the injection robot arms quickly gained...
Swing Robot Arms for Sprue Pick
- Aug 02, 2019
- Hits: 5
RUNMA swing robot arms have four pneumatic-driven axes of motion. The horizontal axis pulls the runner and parts away from the mold. The vertical axis lifts the runner/parts out of the mold area. The...
Features of Swing Robot Arms
- Aug 02, 2019
- Hits: 6
Swing robot arms are applicable to all types of horizontal injection machine of 50~250T for take-out products and sprues. The dedicated plastic injection auxiliary equipments are involved in the whole...
AC Servo Motor Robot Arms
- Aug 02, 2019
- Hits: 19
3-Axis/5-Axis robots with AC servo are extensively applied to horizontal plastic injection machines from 50~3000T which are mainly designed for rapid and precise removal on strict demands of good appearance...
Custom Injection Robot Arms
- Aug 02, 2019
- Hits: 4
When it comes to custom injection molding, the implementation of injection robot arms and automation processes have proven to increase throughput, reduce cycle times, reduce scrap, and improve both part...
Features of Injection Robot Arms
- Aug 02, 2019
- Hits: 5
The structure of injection robot arms: traverse axis can be driven by rod less cylinder or inverter motor, AC servo motor is optional. Vertical and Crosswise driven by pneumatic cylinder. Traverse axle...
Injection Molding Machine Robots
- Aug 02, 2019
- Hits: 6
RUNMA continues to see more insert loading work cells requested by end-users for trimming and debarring. Many injection molders used simple injection robot arm in the past but are now realizing the limitations...
Advantages of Injection Robot Arms
- Aug 02, 2019
- Hits: 7
Servo Injection Robot arm - Servo Traverse Type Robot is extensively applied to plastic injection molding machine. Injection robot arm can rapid take out the injection runners, sprues and finished products...
Injection Robot Arms
- Aug 02, 2019
- Hits: 6
Injection robot arms are suitable for irregular take-out motions for special products, such as hooked products. Allows for products stacking up. Once stacking quantity has been reached, an out signal...
Variety of Factory Automation Systems
- Aug 02, 2019
- Hits: 8
The RUNMA completed many automation systems for various industries such as medical, automotive, food and cosmetic and they have many different focus points. We closely discuss with client to create the...
3-Axis Robots for Injection Molding Machine
- Aug 02, 2019
- Hits: 4
There are many processes to complete a product such as injection molding, assembly, inspection, packing, boxing and so on. Factory sutomation system replaces all or part of these processes by...
Agent of Swing Robot Arms
- Aug 02, 2019
- Hits: 6
The swing robot arm offers take -times available for sprue separation and parts removal. Self-lubricating pneumatic drive system affords low maintenance, exceptional stability and reliability. This series...
RUNMA Robot Arms
- Aug 02, 2019
- Hits: 6
When it comes to plastics automation, RUNMA Robot offers numerous products to assist in every step of the process. From heating and cooling to granulating and recycling, our products have many applications...
RUNMA Swing Robot Arms
- Aug 02, 2019
- Hits: 6
RUNMA Robot company was located in Dongguan city, specializing in the research, development and manufacture of automatic machinery. With our team's solid background and excellent experience of manufacturing...
Swing Robot Arms
- Aug 02, 2019
- Hits: 4
1. Swing Arm Mechanism The mechanism of swing robot arms is integrated with branded pneumatic cylinder, efficient shock absorber, drop proof locking mechanism, compact and adjustable gripper, self...
Applications of 3-Axis Robots
- Aug 02, 2019
- Hits: 3
This section uses the 3-axis robot arm of the power system's high torque metal gear servos. 3-axis robot arm extension is the radius of gyration of the arm can reach 355mm, if the steering torque...