Get to Know Single Axis Robot Arms
RUNMA is a leading manufacturer and supplier of robot arms in Hengli Town, Dongguan, Guangdong. Today, we will have look on single axis robot arms, also 1-axis robot arms. They are mainly used to take out of finished products from 150T–350T horizontal injection molding machines, its cross traveling walking use AC servo motor to drive accurately. They can make the movement smoother and more precise. With arms and fly jib's driven by pneumatic actuators, they have good stability and reliability. The following is some basic specification of the robot arms: The max load of the jig(including the fixture) is three kilogram. The time of empty loop is about ten seconds. Working pressure is about 5-7 kgf/cm2. Power consumption is about 1.1 kva. The weight of the whole robot arm is about 200Kg. And they are equipped with standard ceiling and holding fixture.