What Can the New Infrastructure Bring to the Robot Industry?
- Jul 10, 2020
- Hits: 23
With the technological revolution and industrial transformation, the connotation and extension of new infrastructure are not static. Since the 18th National Congress of the Communist Party of China, China's...
An Introduction to a Belt Conveyor
- Jun 26, 2020
- Hits: 73
A belt conveyor is a mechanical device, driven by friction to transport materials continuously. It can be used to form a material conveying process from the feed point to the emptying point on a...
Industrial robot arm for production automation
- Jun 22, 2020
- Hits: 32
With the rapid development of industry and fierce competition in the market, more and more manufacturing factories have moved from manual labor to semi-automated and automated development, thereby, improving...
Application of Industrial Manipulator
- Jun 10, 2020
- Hits: 52
Social demand for industrial manipulators is still very strong, and it has maintained a relatively high growth rate. In the next decade, global average sales of industrial manipulators will remain its...
Installation and maintenance of injection molding machine robot arm - part two
- May 27, 2020
- Hits: 47
4: Pneumatic system Including the multi-axis servo drive, as long as there is a wrist rotation and vacuum gripping action, almost all robot arms will have pneumatic functions. Pay close attention to the...
Installation and maintenance of injection molding machine robot arm - part one
- May 13, 2020
- Hits: 34
The reasons for the failure of the automated robot arm may be that most of the joint parts of the robot arm are fixed by screws, which may be loosened due to long-term vibration, causing the robot arm...
What Should be Noticed When Installing Hot Runner?
- May 05, 2020
- Hits: 32
Hot runner technology has become an important field in plastic injection molding process due to its unique technical advantages such as cost saving and shortening molding cycle. Precautions for hot runner...
Tips on Swing Arm Robots Maintenance
- Aug 02, 2019
- Hits: 24
1. WATCH THE ROBOT CYCLE One of the keys to keeping swing arm robots in good condition involves simply watching and listening, which can reveal a lot about the robot's general condition. As the robot...
Useful Tips When Injection Molding Machine Robots Having a Problem
- Aug 02, 2019
- Hits: 131
1. The signal of "Robot arms move up" appears abnormally Tips and solution: Check if the wires are loose,check if sensory switch is working normally. 2. Proximity switch is too far away from...
Benefits of Injection Molding Machine Robots
- Aug 02, 2019
- Hits: 39
Firstly, robot can fix the whole cycle time. If the plasticizing time, injection time, holding time, cooling time and switch mold time are the same, the yield can be improved. Also, factories can arrange...
The Application of Injection Molding Machine Robots in the Plastic Injection Industry
- Aug 02, 2019
- Hits: 8
With the rapid development of plastic processing industry in China, injection molding machine robot automation is getting more and more popular. Modern injection molding machines are often equipped with...
Research and Application of Injection Molding Machine Robots
- Aug 02, 2019
- Hits: 8
With the development of China's plastics industry, the annual growth rate of China's plastics machinery industry in recent years is about 30% profit growth is also much higher than the growth...
Tips on Expanding the Lifespan of Injection Molding Machine Robots
- Aug 02, 2019
- Hits: 8
No matter what we want, we expect longer lifetime, less trouble. Let's take our cell phone as an example, while using it, we expect longer lifetime, less battery consumption and faster speed. Believe...
Possible Problems and Solutions When Using 3-Axis Robots
- Aug 02, 2019
- Hits: 25
Problem: Fail to suck products occasionally Reason 1: The air pipe is folded,the air can not go through. Solution: Dredge the pipe, or replace the damaged pipe. Reason 2: The air pipe or pipe connector...
How to Connect a 3-Axis Robot to the Injection Molding Machine?
- Aug 02, 2019
- Hits: 129
After the 3-axis robot is installed on injection molding machine, then we need to connect the 3-axis robot with the injection machine: 1. Connect the wires: Turn off the power of injection machine....
How to Install a 3-Axis Robot on Injection Molding Machine?
- Aug 02, 2019
- Hits: 19
1. Check if the injection machine is functioning normal: open mold, close mold, thimble out, safety door and so on. 2. (If the injection machine fixed platen already have holes, this step can be ignored)...
Problems and Solutions While Using 3-Axis Robots
- Aug 02, 2019
- Hits: 12
The alarm warns no matter if the 3-axis robots successfully sucked the product or not, what's the reasons and solutions? Reason 1: Somewhere is leak air, the negative pressure is not set correctly....
RUNMA Expands High Speed Take Out Robots
- Aug 02, 2019
- Hits: 8
RUNMA automation have extended the range of high speed take out robots primarily used in the packaging industry. The high speed robots will run at high speed on injection molding machines from 80...
Plastic Robotic Arms
- Aug 02, 2019
- Hits: 5
As injection molding machine technology and the rapid development of science and technology, the plastic molding factory automation demand is higher and higher, so the injection robot arms quickly gained...
Swing Robot Arms for Sprue Pick
- Aug 02, 2019
- Hits: 5
RUNMA swing robot arms have four pneumatic-driven axes of motion. The horizontal axis pulls the runner and parts away from the mold. The vertical axis lifts the runner/parts out of the mold area. The...